Day 2: Planning The Design (Isaak)

 This day was largely planning how we were going to make our projects because we couldn't go to the wood shop due to a rain storm. For my project I figured out a method of how to make it as well as find a better way to design the sloping of the checker pattern, by increasing the height of the tallest piece it solved the problem of my shortest pieces being too short and thin. In order to get the checker pieces to stick together without having them warp over time was a difficult issue one that was solved by not gluing them together with wood glue but with epoxy this would act as a seal to prevent moisture from coming into it and warping the wood, also gluing the pieces to themselves instead of just a board below them will help them stay together. For the type of wood I am using I'm sticking with cherry and walnut. For us walnut is in surplus. I am looking forward to buying the wood tomorrow and to start milling it so I can cut it and actually start on making my project.

This is a sketch of my Project. 


Comments

Post a Comment

Popular posts from this blog

Day Ten: The End (Aiden)

Image
The End (At the time of writing this, my lamp project isn't complete, so I'll be talking mainly about my bedside table project.) I put the last coat of finishing oil on my bedside table project today, and that marked the final step in completing it as complete. With it done, I think I honestly really like how it turned out, and I think the finishing oil really brought out some vibrant colors in the wood, making it look like it was done by a professional. I did realize shortly after finishing that I put the phone holder on the wrong side, as I usually place my phone close to me on my bedside table, but aside from that small error and the slight lean of the bedside table forward due to the base not being at a perfect 90 degree angle I think that it's pretty perfect and it turned out really close to the way I wanted. That being said, the journey to getting it this way wasn't easy and I think that, despite having a passion for woodworking and doing projects in my garage lon...
Read more

Day Eight: Woodworking Complete (Aiden)

Image
 Day Eight: Woodworking Complete With all of my woodworking completed yesterday, all I had left to do was finishing touches and extra features. I started by sanding the piece down and making any rough edges or imperfections smooth, but it started raining before I was done so I didn't get to finish. Stuck inside because of the rain, I got to work hot-gluing the LEDs onto my lamp piece. My original plan was to have the LEDs only on the bottom part of the lamp, but since I still had multiple feet of LED string left that would otherwise go to waste, I decided to also add it to the top piece and connect the two with a cool wire-coil design in the center. I finished that design right before lunch. The lighting on my lamp piece      After lunch the rain had mostly stopped, so Mr. Grisbee set up a temporary table for me using some sawhorses and I started work again. I ran the router over it to round the edges and give it a more connected look. Once that was done, I sanded it...
Read more

Harper: Seven Warehouses (Day 3)

Image
 The Seven Wherehouses Today was the first big day of the woodworking course. We had all finalized their budgets, and we were ready to go and buy the wood. We started the morning by handing in our permission slips to leave to go to the warehouse where they sell wood. The warehouse was called Clarks, and I didn’t know where it was until we got there, so I was a little lost, but I was extremely shocked at how big it was when we got to the warehouse. They had seven different warehouses, all with different kinds of wood from all over the world. We met an employee at Clark’s, and he showed us around after we presented what we needed for our woodworking projects. For my project, I did not need a lot of wood, and I ended up sharing a large wood board with Nate. Nate and I shopping list was pretty basic, unlike Aiden‘s in Isaak’s. Because Isaac and Aiden were in warehouse seven looking at all the different versions of walnut wood, Nate and I got to explore the different warehouses on the p...
Read more